Pulsafeeder - LME4TB-KTC1-510

More products of Pulsafeeder

• LPE5S2-VTC1-C2XXX

  Make request
• LPE5S2-VTC3-C2XXX

  Make request
• LPH6SB-PTC3-XXX

  (Pulsatron Metering Pump, Series E Plus, max. delivery: 5GPH, 120GPD (18,9 Liter/hour) max. working pressure: 100psi (7,0 bar) Manual ON/OFF, manual stroke control 0-100%, Pressure head glassfilled Polypropylene, Diaphragm PTFE, valve balls ceramic, .38 Dia. Tubing: .38"ID x .50"AD Electrical: 230Volt, 50-60 Hz, 1ph, 1,8m 3-wire)

  Make request
• LPK3EB-VTC1-CZEUROXXX

  Metering Pulsatron, Series E plus, Flow rate 2.3 liter / hr. (0.6 Gal./Std.), 125 strokes / min, max. output pressure 7,0 bar (100 psi). Dosing of PVC, PTFE valve seats, valve ball ceramic. External control, with stop Connections: 1/4 "ID x 3/8" OD hose connection. Drive: 230V, 50 / 60Hz. Piece Weight: 5.850 kg

  Make request
• MC 9230 AAXXBX

  Controller

  Make request
• MC 9550 ABXXBX

  Controller

  Make request
• MICROTRAC CT

  MicroTrac cooling tower controller, Enclosure: NEMA 4X / IP65 • Dimensions: 6.44 x 3.2 in (163 x 82 mm) • Power Supply: 90 VAC / 50/60Hz / 5A; 250 VAC / 50/60Hz / 5A • Control Output: Line Voltage @240VA per Relay (2 Amps @ 120VAC) • Display: LCD • Set Point Range: 0 – 9,999 μS/cm • Set Point Differential (Hystersis): Fixed 5% below the set point

  Make request
• 25HJ

  Flat Pulsar

  Make request
• MTC2LTX-XXX

  Controller, Microtrac, 230 Volt for Water Treatment in cooling towers

  Make request
• OVERHAUL REPAIR KIT FOR MODEL- 7440 S-E GEAR-RATIO-10 PISTON -1.5 KOPKIT NO-KPFRABMACCC SERIAL V7712

  Make request
• P/N G41-72

  Tag.No/SR No/Model No: MP-RW641-P062/N.A/18AM02 MP-RW641-P058/N.A/RPHB EM80-315/2 MP-RW641-P064/N.A/18AM02 PR Number: 11422830 RMC RTF-MEC 6 2000305469 RING, RETAINING Parts for gear pumps: Drawing & Item Number: GMH6-ACE-KLP/11 MANUFACTURER: PULSAFEEDER MANUFACTURER: ROPER PUMPS Old part number: 46710 Old part number: 46711

  Make request
• PULSA SERIES 880

  Diaphragm Metering Pump, Pulsa Series 880, Model # 880-S-E, Pump Head from StSt 316L, PTFE flat diaphragm, Viton O-ring seals, single ball valves, StSt 316L 6,73 Gal / hour (25,1 Liter / hour) 24,82 bar. Hydraulic Bypass Setting: 27 bar 1,125 Inch Piston, 0,5" NPT Connections, selfpriming Manual Stroke Length Control, Standard Motor (Factory Supplied), 1450 RPM, 0,5 HP, 230/400V, 3 ph, 50 Hz, Totally enclosed. Pump will be supplied with IEC 100 frame base Paint: Two Part Epoxy Green 880-S-E.. Unit weight: 40,000 kg

  Make request
• PUMP ASSAMBLY AND SPARE MANUAL FOR MODEL 25HJ S/N: -N626351-8 GEAR- 30 PISTON DIA -13 MM KOPKIT NO-N

  1). 25HJ Pulsar - this pump requires 0.25 kW. The motor mounting is by B14 flange. We can accommodate 63, 71 and 80 frames.

  Make request
• PUMP ASSEMBLY AND SPARE MANUAL FOR MODEL 25HJ SER-V729784-22 GEAR- 20 PISTON DIA -10MM KOPKIT NO-NPK

  1). 25HJ Pulsar - this pump requires 0.25 kW. The motor mounting is by B14 flange. We can accommodate 63, 71 and 80 frames. 2). The vacuum style leak detection is no longer available. This replacement pump will be complete with pressure type leak detection.

  Make request
• PUMP ASSEMBLY AND SPARE MANUAL FOR MODEL- 7440 SE GEAR-RATIO-10 PISTON -1.5 KOPKIT NO-KPFRABMACCC SE

  1). 7440-S-E – this pump requires 1.1 kW to meet the maximum pressure rating. The motor mounting is by feet. I quoted the pump considering IEC 90 frame. If you need another size, please advise.

  Make request
• PUMP-AND-MOTOR ASSEMBLY – 30 GPH VS 200 PSIG 1,044,250.00 2,088,500.00 250,620.00 2,339,120.00

  Pump-and-motor assembly Pulsafeeder metering pump model 880H-S-E, ½” X ½” female NPT port size, 316 stainless steel liquid end material, 1” dia. Teflon tube diaphragm, 1.5” piston diameter, 0.625” stroke length, 1 piece– ½” ball for each suction and discharge, capable of delivering 30 gph against 200 psig. Pump is directly coupled to a ¾-hp, 1750-rpm, 230/460-V, 3-phase, TEFC, 56-frame size, 60-Hz motor

  Make request
• PUMP-AND-MOTOR ASSEMBLY – 9.88 GPH VS 100 PSIG

  Pump-and-motor assembly Pulsafeeder metering pump model 680-S-E, ½” X ½” female NPT port size, 316 stainless steel liquid end material, flat diaphragm, 1.125” piston diameter, 0.50” stroke length, 1 piece – ½” ball for each suction and discharge, capable of delivering 9.88 gph against 100 psig. Pump is directly coupled to a ¾-hp, 1750-rpm, 230/460-V, 3-phase, TEFC, 56-frame size, 60-Hz motor

  Make request
• REPAIR KIT FOR OVERHAUL FOR CHIMOCAL PUMP MODEL 25HJ S/N: -N626351-8 GEAR- 30 PISTON DIA -13 MM

  Make request
• REPAIT KIT FOR OVERHAUL CHEMICAL PULSAFEEDER PUMP MODEL 25HJ SER-V729784-22 GEAR- 20 PISTON DIA

  Make request
• RFN-7015.0 STAINLESS STEEL, FOR FEEDER A2-200X3.5,IDENT-NO. 1997416.

  Locking Assembly

  Make request
• RK 500X300

  Rectangular duct fans

  Make request
• RK 500X300.

  Rectangular duct fans

  Make request
• RKB 400X200

  Rectangular duct fans

  Make request
• RKB 500X250

  Rectangular duct fans

  Make request
• VRS 1

  Make request
• VRS1 FOR CK SERIES

  Speed Switch for CK series

  Make request
• W032575-CUO

  Gasket, flat.312, .093, .016, Unit weight: 0,010 kg

  Make request
• W032580-HC0

  Make request
• W032724000

  UNION GASKET

  Make request
• W032825-000

  Make request